Algae can turn pristine aqua-blue swimming pools into sitting puddles of sludge, so it’s a common problem for pool owners. If you’re asking whether Shock or chlorine is the magic bullet, you’re not the only one. While both play an essential part in removing algae from your pool, each has its strengths and weaknesses depending on the level of algae infestation in your pool and how effectively they’re used alongside a robot pool cleaner and other pieces of pool maintenance equipment.
Shock and Chlorine Explained
Chlorine serves as the primary sanitizer of pool water, keeping bacteria, algae, and other unwelcome contaminants at bay. It does a great job of keeping pool water clean if it is maintained at proper levels. However, in the case of an algae bloom, regular chlorine levels might not kill them all off.
Pool shock, however, is a high-dose chlorine treatment that rapidly increases the chlorine content in your pool. This fast-rising rate destroys algae and bacteria, making it necessary for green, yellow, or black algae blooms.
Q: Pool Shock Vs Regular Chlorine — When Do I Use Each?
Light Algae Growth: If your water has a hint of green, raising your chlorine levels and running your pool vacuum and skimmer might do the trick.
Moderate to severe Algae Bloom: The best option is pool shock. Pool vacuuming is another way to remove dead algae from swimming water.
Chronic algae problems: When your shock treatments aren’t working, it may be time to repeat the process and scrub the pool walls with a wall-climbing pool cleaner.
How to Shock to Kill Algae Effectively
Test Your Water—Before adding Shock, Make sure your pool’s pH is between 7.2 and 7.6 so that the chemicals will be as effective as possible.
Select the Right Shock—Use a calcium hypochlorite shock to treat green algae or sodium hypochlorite to treat yellow and black algae.
Apply Shock in the Evening If you’re using chlorine, sunlight can diminish sunlight can diminish it, so you should shock your pool when it’s dark.
The filed algae particles need to be removed because they are brownish from Shock, so we brush the walls and floor with a swimming pool robot cleaner like Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro, or Beatbot AquaSense 2.
Run Your Filter: Run your filter for at least 24 hours to circulate the treated water and clean out debris.
Will a Pool Robot Remove Algae?
So, if you have a shock treatment to eliminate algae, a pool cleaning robot is excellent at cleaning up algae residue. They won’t kill algae in your pool, but they remove the dead particles, leaving your pool sparkling clean! Advanced cleaning models, the most notable ones are Maytronics pool cleaner and Beatbot, which also offer wall climbing pool cleaner capability to scrub off stubborn algae from the pool surfaces.
To Stop Algae from Growing Again
Monitor chlorine levels, aiming for 1-3 ppm.
Skimmer, filter, and people mover. Remove organic debris regularly.
Run an algaecide as a preventative measure.
Discover how to acid-wash pool surfaces to remove even the most stubborn pool algae stains.
Learn how to drain an inground pool without a pump for deep cleaning when needed.
What Is A Pool Booster Pump — Enhances Circulation & Cleaning Efficiency
Conclusion
This is another crucial factor when it comes to keeping your pool algae-free. Superchlorination is essential for severe algae blooms, while routine chlorine maintenance stops algae from growing. After you’ve brushed your algae, you’ll want to suck up as much of it as possible using a robotic pool cleaner, like the Beatbot AquaSense 2 Ultra, leaving no room for growth.
